Epson SC-F2000 Series User Manual Download Page 42

Page: 42 / 104

Loosen the fixing lever.

Remove the screw that secures the parallel
adjustment plate.

Keep the removed screws in a safe place.

Remove the parallel adjustment plate.

Important:

Be very careful when handling the parallel
adjustment plate as this is a precision
component and must not be dropped.

Remove the three screws inside the height
adjustment lever.

Keep the removed screws in a safe place.

Remove the height adjustment lever.

Remove the labeled round part attached
underneath the height adjustment lever.

Important:

After removing the labeled round part, the
current height position is not displayed.
When loading media, follow the height
adjustment procedure to adjust the height.

SC-F2000 Series User’s Guide

Other Printing Methods

Summary of Contents for SC-F2000 Series









































































































Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands

Epson SC-F2000 Series, User Manual

Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands