Epson SC-F2000 Series User Manual Download Page 53

Page: 53 / 104

Confirm that the printer is on, and then press the

button.

The Maintenance menu is displayed.

Press the

buttons to highlight

Head

Cleaning Set

, and then press the

button.

Press the

button.

Press the

buttons to highlight

Yes

, and then

press the

button.

When you press the

button, the platen and

the print head move to the maintenance position.

Replace the parts in the following order; wiper
unit, anti-drying caps, and then flushing pad.

“Replacing the wiper unit/anti-drying caps”

on page 53

“Flushing pad” on page 55

Replacing the wiper unit/anti-drying
caps

Open the printer cover.

Unpack the new wiper unit.

Put on the gloves supplied with the head cleaning
set.

Place your fingers into the groove at the back of
the wiper unit, and raise it a little towards you.

Grip the wiper unit and remove it.

Wrap the old wiper unit in the packaging of the
new wiper unit.

SC-F2000 Series User’s Guide

Maintenance

Summary of Contents for SC-F2000 Series









































































































Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands

Epson SC-F2000 Series, User Manual

Search results

Summary of Contents for SC-F2000 Series

Reviews:

Related manuals for SC-F2000 Series

Brands by name

Popular brands