Epson SC-F2000 Series User Manual Download Page 48 | Manualshive

Page: 48 / 104

background image

Periodic Maintenance

To maintain optimum print quality, as well as adjusting
the print head and so on, you also need to clean and
replace parts periodically.

If maintenance is not performed, the printer's service
life may be reduced, or you may be liable for the cost of
any repairs.

Frequency

Shaking ink cartridges

One of the characteristics of the ink (especially White
ink) used by the printer is that sedimentation occurs
easily. If you use ink with a sediment, the print quality
may decline and a printer malfunction may occur. To
maintain quality, the ink cartridges need to be shaken
periodically.

White

At the start of every working day or
every 20 hours (when a message is
displayed)

Color

Once a month

* A message reminding you to shake the ink cartridge is

displayed at the following times.
- When the printer is turned on after it has been off for 20
hours or more.
- When the

x

button is pressed after the printer has been on

for 20 hours.

Shaking Cartridges

U

“Procedure” on page 58

Tube Washing

Because sedimentation occurs easily in White ink, the
whiteness may decline or become uneven if you
continue printing in white. For the best results, wash the
tube periodically. A message is displayed on the control
panel when the White ink tube needs washing.

White

When a message is displayed

Color

Periodic washing is not necessary.
Only when the print result is not
improved after repeating head
cleaning several times.

U

“Tube Washing” on page 56

Caps Cleaning

When it is time to clean the suction cap, a message is
displayed on the control panel.

Suction cap

When a message is displayed

U

“Cleaning Caps” on page 51

Scale cleaning

When it is time to clean the carriage scale, a message is
displayed on the control panel. When cleaning the
carriage scale, you also need to replace the air filter.

Carriage scale

When a message is displayed

U

“Cleaning the scale and replacing the filter” on

Replacing

When it is time to replace the following consumables, a
message is displayed on the control panel. To check the
levels for consumable products, select

Level

from the

Printer Status

menu on the control panel. Select the

consumable product you want to check to view the level.

U

“Menu Operations” on page 69

You can check the amount of free space in the waste ink
bottle from the control panel's top screen.

U

“Screen View” on page 15

Replace the air filter when cleaning the carriage scale.

Head Cleaning
Set

U

“Replacing the Head Cleaning Set”

Ink cartridges

U

“Replacing and Shaking

Cartridges” on page 58

Waste ink
bottle

U

“Disposing of Waste Ink” on

Air filter

U

“Cleaning the scale and replacing

the filter” on page 61

Preparations and Notes for
Periodic Cleaning

Preparation

Prepare the following before performing maintenance
for cleaning and replacing each part, and handling waste
ink.

SC-F2000 Series User’s Guide

Maintenance

48

«
...
46
47
48
49
50
...
»

Summary of Contents for SC-F2000 Series









































































































Reviews:

No comments

Related manuals for SC-F2000 Series

Pixma MG2400 Series

Brand: Canon Pages: 2

Brand: Oki Pages: 24

Brand: VAF instruments Pages: 24

Brand: 3DP Pages: 12

Brand: Panasonic Pages: 54

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 8

KX-FLB851 - All-in-One Flatbed Laser Fax

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: Samsung Pages: 9

Bixolon SRP-500

Brand: Samsung Pages: 27

550N - CLP Color Laser Printer

Brand: Samsung Pages: 288

2 COLOR THERMAL PRINTER SRP-275

Brand: Samsung Pages: 8

Brand: Samsung Pages: 6

Brand: Samsung Pages: 91

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands