Control panel
A
P
light (Power light)
Indicates the printer's operational status by lighting or flashing.
On
:
The power is on.
Flashing
:
The printer is operating such as receiving data, shutting down, or moving the movable
base.
Off
:
The power is off.
B
P
button (Power button)
Turns the power on and off.
C
+
button (Cancel button)
If you press this button after print data has been sent, the Cancel Job confirmation screen is displayed. To cancel the
print job, select
Yes
and then press the
Z
button.
If you press this button while a message or menu is displayed, the message or menu is closed and you are returned to
the Standby screen.
D
Screen
Displays the printer's status, menus, error messages, and so on.
U
E
}
button (Operate movable base button)
Moves the movable base backwards and forwards. The movement direction depends on the position of the base before
the button is pressed.
When base at side
:
Moves into printer
When base inside
:
Moves towards you
When base in center :
Moves towards you
If you press the button again while the base is moving, it stops moving.
SC-F2000 Series User’s Guide
Introduction
13