Epson SC-F2000 Series User Manual Download Page 6 | Manualshive

Page: 6 / 104

background image

❏

Do not move the print heads by hand; otherwise
you may damage this product.

❏

Always turn the product off using the Power button
on the control panel. When this button is pressed,
the Power light flashes briefly then goes off. Do not
unplug the power cord or turn off the product until
the Power light stops flashing.

When handling the ink
cartridges

❏

Keep ink cartridges out of the reach of children and
do not drink.

❏

Do not touch the IC chip on the side of the cartridge.
This may affect normal operation and printing.

❏

The IC chip on this ink cartridge retains a variety of
cartridge-related information, such as the ink
cartridge status, so that the cartridge may be
removed and reinserted freely. However, each time
the cartridge is inserted, some ink is consumed
because the printer automatically performs a
reliability check.

❏

If you remove an ink cartridge for later use, protect
the ink supply area from dirt and dust, and store it in
the same environment as this product. Note that
there is a valve in the ink supply port, making covers
or plugs unnecessary, but care is needed to prevent
the ink from staining items that the cartridge
touches. Do not touch the ink supply port or
surrounding area.

Note on this Guide

Meaning of Symbols

!

Warning

Warnings must be followed to
avoid serious bodily injury.

!

Caution

Cautions must be followed to
avoid bodily injury.

c

Important

Important must be followed to
avoid damage to this product.

Note

Notes contain useful or
additional information on the
operation of this product.

Operating System Versions

In this documentation, the following abbreviations are
used.

Windows refers to Windows 8, 7, Vista, XP.

❏

Windows 8 refers to Windows 8, Windows 8 Pro,
and Windows 8 Enterprise.

❏

Windows 7 refers to Windows 7 Home Basic,
Windows 7 Home Premium, Windows 7
Professional, and Windows 7 Ultimate.

❏

Windows Vista refers to Windows Vista Home
Basic Edition, Windows Vista Home Premium
Edition, Windows Vista Business Edition,
Windows Vista Enterprise Edition, and Windows
Vista Ultimate Edition.

❏

Windows XP refers to Windows XP Home Edition,
Windows XP Professional x64 Edition, and
Windows XP Professional.

Macintosh refers to Mac OS X.

❏

Mac OS X refers to Mac OS X 10.6.8 and later
versions.

SC-F2000 Series User’s Guide

Introduction

6

«
...
4
5
6
7
8
...
»

Summary of Contents for SC-F2000 Series









































































































Reviews:

No comments

Related manuals for SC-F2000 Series

Brand: 3D Systems Pages: 26

Brand: 3D Systems Pages: 39

WorkSeries 200 Series

Brand: 3D Platform Pages: 9

Brand: CAB Pages: 40

Brand: quadient Pages: 130

WorkCentre 5325

Brand: Xerox Pages: 160

WorkCentre 5016

Brand: Xerox Pages: 2

WorkCentre 490cx

Brand: Xerox Pages: 258

WorkCentre 4260 Series

Brand: Xerox Pages: 210

WorkCentre 3550

Brand: Xerox Pages: 32

WorkCentre 3315DN

Brand: Xerox Pages: 191

WORKCENTER 5222

Brand: Xerox Pages: 28

VersaLink C71 Series

Brand: Xerox Pages: 247

VersaLink C7000

Brand: Xerox Pages: 2

Brand: Xerox Pages: 21

VersaLink B71 Series

Brand: Xerox Pages: 234

WorkCentre 6505

Brand: Xerox Pages: 4

WorkCentre 6015

Brand: Xerox Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands