Take-up with the Take-Up
Feeding Procedure
Printed side in
A
Confirm that the front cover is open.
B
Raise the media loading lever.
C
While pulling the center of the media straight
down, wrap it around the roll core from back to
front, and affix it using commercially available
adhesive tape.
c
Important:
Affix the media to the take-up roll core with the
media pulled tightly. If media is affixed loosely,
the media may move around during take-up.
D
Repeat the following procedure and take-up the
media for a double wrap around the roll core.
a. Hold the
button pressed to slightly slacken
the media at the back side.
b. While holding the center of the media on the
platen, pull it out by moving it toward yourself,
and slacken the media at the front side.
c. Hold down the Manual switch on the
side to take-up the slack media around the core.
c
Important:
When taking-up the media around the core,
do take-up of only the slackened part. If you do
take-up without slackening, it will cause
problems, such as wrinkles.
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
83
