B
Anti-drying caps
There is a row of 6 on the SC-F10000H Series and 4 on the SC-F10000 Series.
Except during printing, these caps cover the print head nozzles to prevent them drying out. Depending on the
dirtiness, a message about cleaning appears on the control panel's screen. Clean according to the message.
U
“Cleaning anti-drying caps” on page 112
C
Media edge plates
The media edge plates prevent the media riding up and keeps fibers on the cut edge of the media from touching the
print head. Position the plates at either side of the media before printing.
U
D
Platen
This suctions and fixes the media for smooth printing and media feeding.
U
E
Pressure rollers
These rollers press down on the media during printing.
F
Suction cap
Ink is drawn out from the print head's nozzle with this cap.
Clean the suction caps before doing Print Head Refresh.
U
“Cleaning suction caps” on page 115
G
Wiper unit
The wiper removes ink from the surface of the print head nozzles. The wiper roll that is loaded on the wiper unit is a
consumable item. Replace when a message is displayed on the control panel prompting you to do so.
U
“Replace the wiper roll” on page 125
H
Internal lamp
Illuminates the inside of the printer to make it easy to check print results and areas for maintenance. If the surface
becomes dirty due to ink mist, clean it.
U
“Cleaning the inside light” on page 117
SC-F10000H Series/SC-F10000 Series User's Guide
Introduction
17
