A
Put the cup supplied with the Cleaning Kit on the
tray, and pour approximately 10 ml of Cleaning
liquid into the cup.
B
Dampen the cleaning stick with Cleaning liquid.
When doing this, do not allow Cleaning liquid to
drip from the cleaning stick.
c
Important:
❏
Do not use Cleaning liquid that you have
used for cleaning to clean the next time.
Using dirty Cleaning liquid will make
staining worse.
❏
Tightly close the lid of the Cleaning liquid
and store it at room temperature out of
direct sunlight and away from high
temperatures or humidity.
❏
Used Cleaning liquid and cleaning sticks
are industrial waste. Dispose of them in
the same way as for waste inks.
U
“Disposal of used consumables” on
Cleaning the media cleaners
If the media cleaners are dirty, they cannot sufficiently
wipe dirt and dust off the surface of the media, so there is
a risk that problems may occur, such as clogged nozzles.
If the
Clean the media cleaner. After cleaning is
complete, press [OK].
message appears on the control
panel's screen, use the supplied media cleaner brush to
clean them.
A
Check the on-screen message, and then move to
the back side and remove the media cleaners.
While pressing the tabs on both sides, pull it off.
B
Use the supplied brush to wipe dirt and dust from
the surface.
Since the brush's surface has a direction in which
to wipe, move it in the direction that wipes off the
dirt and dust.
Note:
You can switch the direction in which to wipe.
SC-F10000H Series/SC-F10000 Series User's Guide
Maintenance
111
