For each step given below, be sure to slacken the
media before pulling it out. The media may get
torn if it is forcibly pulled out without slackening.
To slacken the media, press the
button. By
doing so, the media that is loaded on the back side
will rotate in the feeding direction and slacken.
a. Hold the center of the media in one hand, pull it
straight out, and insert its edge into the dryer.
b. While holding the center of the media on the
platen, pull it out by moving it toward yourself,
until its edge comes out from the bottom of the
dryer.
c. Hold the center of the media in one hand, and
pull out the media until its edge reaches the
media holder.
Do not pull the media with both hands. This
could cause the media to skew or move around.
R
Lower the media loading lever.
Normal feeding procedure
After lowering the media loading lever, move on
to the next step.
Take-up feeding procedure
Lower the media loading lever, and then
continue to attach the media to the Auto Take-up
Reel Unit. While the front cover is open, see the
following to attach media to the Auto Take-up
Reel Unit.
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
74
