D
Take up the cut media completely by operating
the Manual switch according to how the media is
rolled.
Removing Media
Caution:
❏
If the media weighs over 20 kg (44.09 lb.), it
should not be carried by one person. When
loading or removing the media, use at least two
people.
❏
Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
Rotate the left media holder handle to the far side
until it stops.
The part A on the illustration and the shaft of the
handle will be visible.
B
To prevent the media from sliding off the roll,
support the roll at its left end.
C
Loosen the left media holder fixing screw and
remove the media holder.
D
Lower the roll onto the roll support.
Be careful not to trap your hands between the roll
and the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right media holder fixing screw and
remove the media holder.
G
Lower the roll onto the roll support.
Be careful not to trap your hands between the roll
and the roll support.
Removing the Loaded
Media
Follow the steps below when removing the media that is
loaded on the back side during replacement and so on.
A
Cut the media.
U
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
89
