Epson SC-F10000 Series, User Manual

Page: 95 / 222

300x600dpi -3.1 pass : Approx. 200 mm (7.87
in.)
600x600dpi -2.1 pass : Approx. 300 mm
(11.81 in.)
600x600dpi -2.5 pass : Approx. 250 mm (9.84
in.)
600x600dpi -3.1 pass : Approx. 200 mm (7.87
in.)
600x600dpi -4.3 pass : Approx. 200 mm (7.87
in.)
600x1200dpi -5.0 pass : Approx. 200 mm (7.87
in.)
600x1200dpi -5.0 pass HD : Approx. 200 mm (7.87
in.)
1200x1200dpi -9.0 pass HD: Approx. 150 mm (5.90
in.)
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit, attach
the media to the roll core.
U
“Loading media” on page 70
U
“Using the Auto Take-up Reel Unit” on
page 77
B
Press , and then press in the order of
Media
Settings
-
Print Adjustments
-
Media Feed
Adjustment
.
C
Select Auto(Standard) or Auto(Details) , and
then press Start .
Auto adjust starts, and an adjustment pattern is
printed. Wait until adjustment is complete.
Selecting
Auto(Details)
displays the pass mode
selection screen. Check that a pass mode to be
used for printing is selected, and then press
OK .
Manual
You can select Manual(Standard) or
Manual(Measurement) to make adjustments.
Manual(Standard)
Make a selection in the following cases.
❏
When Auto adjustment has failed
❏
When you want to perform quick and simple
adjustment by visually inspecting the pattern
Manual(Measurement)
Make a selection in the following cases.
❏
When Auto and Manual(Standard) adjustments
have failed
❏
When banding can be seen in the print results even
after doing the adjustments for Manual(Standard)
❏
When it is difficult to check the patterns for
Manual(Standard) due to bleeding ink, etc.
❏
When you want to print with accurate length
The approximate maximum length of the media
required to print the test pattern is given below.
Manual(Standard): Approx. 100 mm (3.93 in.)
Manual(Measurement): Approx. 600 mm (23.62 in.)
Adjustment Procedure
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit, attach
the media to the roll core.
U
“Loading media” on page 70
U
“Using the Auto Take-up Reel Unit” on
page 77
B
Press , and then press in the order of Media
Settings - Print Adjustments - Media Feed
Adjustment - Manual(Standard) .
C
Press
Start
.
An adjustment pattern is printed. Wait until
printing is complete.
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
95