*4
Note the following points when setting margins.
❏
Leave margins of 10 mm (0.39 in.) or more when using media edge plates. Narrower margins could result in printer
printing over the plates.
❏
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the data will not be
printed.
Note:
If the following points are not observed when Width Detection is
Off
, printing may occur outside the left and right edges of
the media. Ink used outside the edges of the media will stain the inside of the printer.
❏
Ensure that the print data width does not exceed the loaded media width.
❏
When media is loaded to the left of the right side reference position, align the
Print Start Position
setting with the
position where the media set.
U
“General Settings menu” on page 152
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
101
