D
Soak a soft cloth in water, wring it out
thoroughly, and then wipe off any ink, lint, or
dust that has adhered to the platen.
Carefully remove lint and dust stuck in the
groove of the platen.
E
Soak a soft cloth in water, wring it out
thoroughly, and then wipe off any lint, or dust
that has adhered to the media edge plates.
c
Important:
When media with glue has been used or when
ink has adhered to the media edge plates,
follow the procedure in the “Cleaning the
media edge plates when media with glue has
been used or when ink has adhered” in the next
section to clean the front and back of the plates.
If you continue printing while glue is stuck to
the rear, it may rub against the print head.
F
Soak a soft cloth in water, wring it out
thoroughly, and then wipe off any ink, lint, or
dust that has adhered to the upper and lower
parts of the dryer.
Wipe the area shown in the illustration below.
G
After wiping off stains, close the front cover and
move the left and right lock levers inwards.
H
Plug in both of the two power cables and turn the
printer on.
Cleaning the media edge plates when media with
glue has been used or when ink has adhered
Remove the media edge plates from the printer, and
clean the front and back of the plates using a diluted
neutral detergent.
When stains are removed, attach the plates to their
original positions.
SC-F10000H Series/SC-F10000 Series User's Guide
Maintenance
108
