Printing repeating pattern (Step
and Repeat)
You can create and print repeating patterns by placing 1
image and shifting it vertically and horizontally.
The procedure for setting up a pattern is explained
below.
How to create patterns
A
Select the job (image) on which to base the
pattern from the Job List.
B
Click
(Step and Repeat) in the Job Settings
menu.
The setting area changes to the Step and Repeat
settings.
C
Select
Enable Setting
.
The settings items are enabled.
Check
Execute Step and Repeat on the Printer
to process step and repeat and then print on this
printer. In this case, you can only set the size of
the area on which to place the image.
U
“Step and Repeat Process on the Printer” on
D
Set the size of the area on which to place the
image.
Selecting
Layout Area Size
lines up and places
the image in the specified size.
If you select a
Width
for the
Layout Area Size
that is wider than the media's width, the image
that extends beyond the media's width is not
printed.
E
Set whether to shift the position of the image.
Select
in
Layout Pattern
when simply
repeating the image without shifting it.
Example: Shifted 1/2 vertically
Example: Shifted 1/3 horizontally
Example: Shifted 50 mm vertically
SC-F10000H Series/SC-F10000 Series User's Guide
Introduction
56
