Item
Parameter
Explanation
Media
01 XXXXXXXXXX to
50 XXXXXXXXXX
Choose the media settings to use. The registered name appears in
XXXXXXXXXX.
Media Type
Displays the
Media Type
for the media settings that are currently
selected.
Media Width
Set
Width Detection
, and when that setting is Off ,
Media Width
.
Pass Mode
Set the
Pass Mode
for the media settings that are currently selected.
Advanced Settings
Set the content of
Advanced Settings
for the media settings that are
currently selected.
See the following table for details on the setting content.
U
“Media Setting Item” on page 162
Print Adjustments
Set these in the following cases.
❏
Using new media not registered to the printer
❏
When banding or graininess is found in the print results even after
Automatic Adjustment is performed
❏
When changing
Advanced Settings
after saving media settings
❏
When the media type is the same but the width is different
Normally, do
Automatic Adjustment
first. If banding or graininess is still
found in the print results after doing automatic adjustment, do
Head Alignment
and
Media Feed Adjustment
manually.
U
“Media Setting Item” on page 162
Automatic Adjustment
Print Head Alignment
Auto
Manual(Simple)
Manual(Standard)
Media Feed Adjust‐
ment
Auto(Standard)
Auto(Details)
Manual(Standard)
Manual(Measureme
nt)
Media Management
01 XXXXXXXXXX to 50 XXXXXXXXXX
Change the registered media settings. New registrations are normally
done when loading media or in advance on the provided Epson Edge
Dashboard.
U
“Media Setting Item” on page 162
Manage Remaining Amount
Manage Remaining
Amount
On
Select
On
and set the length of the media when loading media, and you
can manage remaining amounts as shown below.
❏
The remaining amount of media and the time until you need to
replace the media are shown in the Home screen.
❏
Displays a warning message for the remaining amount of media.
❏
Print the remaining amount when media is cut.
Off
*
Remaining Amount
1.0 to 9999.0 m
(120.0 m
*
) (3.3 to
32808.1 ft. [393.7
*
])
Enter a value for overall roll length between 1.0 and 9999.0 m (3.3 and
32808.1 ft.). You can set in 0.1-m (0.1-ft) increments.
Remaining Alert
1.0 to 999.5 m (5.0
m
*
) (3.3 to 3279.2 ft.
[16.4
*
])
A warning message is displayed if the amount of media remaining reaches
this length. Choose a value between 1.0 and 999.5 m (3.3 and 3279.2 ft.).
You can set in 0.1-m (0.1-ft) increments.
SC-F10000H Series/SC-F10000 Series User's Guide
Control Panel Menu
161
