Item
Parameter
Explanation
Cleaning Setting
The printer constantly monitors the condition of the print head nozzles
while printing, so set the operation for when clogged nozzles (missing
nozzles) are detected during monitoring.
When the number of clogged nozzles that are detected exceeds the
number set in
Threshold Of Clogged Nozzles
, print head cleaning is
executed as part of maintenance.
Max Retry Cleaning Count
sets the number of times maintenance can be
retried if the clogged nozzles are not cleared after maintenance is done.
When
Maintenance Schedule
is set to
Between Jobs
, then maintenance
is done after completing the job during which clogged nozzles were
detected, but before the next print job starts. With
When Detected
,
printing is stopped when a clogged nozzle is detected, and then
maintenance is done. Because cleaning is done while printing, printing
may be disturbed or head striking may occur.
Threshold Of Clog‐
ged Nozzles
1 to 50 (5
*
)
Max Retry Cleaning
Count
0
*
1
2
Maintenance Sched‐
ule
Between Jobs
*
When Detected
Nozzle Compensation
On
*
Normally, leave this
On
.
When
On
is set, printing is done while normal nozzles compensate for the
ink that could not be ejected by clogged nozzles.
Off
Periodic Cleaning
When
On
is set, cleaning is done at the interval set for one of Print
Duration, Print Page, or Print Length.
On
Print Duration
1 to 9999 minutes
Print Page
Each 1 to 9999 pages
Print Length
1 to 9999 meters
(3.28 to 32805.12 ft.)
Off
*
Actions Beyond the
Threshold of Missing
Nozzles
Stop Printing
Set the action when the number of clogged nozzles that are detected
exceeds the number set in
Threshold Of Clogged Nozzles
.
When
Stop Printing
is set, the message
Auto Nozzle Maintenance
found that the allowable number of clogged nozzles has been
exceeded. The print quality may decline.
appears on the control panel
screen, printing stops, and the printer idles.
When
Show Alert
is set, printing continues without stopping while the
message remains displayed.
When
Auto Cleaning
is set, the print head is cleaned at the timing set in
Maintenance Schedule
.
Show Alert
*
Auto Cleaning
Maintenance Cleaning
On
*
When
On
is set, the print head is cleaned automatically when the printer is
not used for a specified period. This cleaning ejects sedimented ink in the
ink tubes to prevent print quality from falling.
Off
Network Settings
Network Status
Wired LAN Status
You can check batches of a variety of information in network settings that
are set in
Advanced
.
When
Print Status Sheet
is selected, a list is printed.
Print Status Sheet
SC-F10000H Series/SC-F10000 Series User's Guide
Control Panel Menu
159
