Item
Parameter
Explanation
Margins
Side(Right)
3 to 25 mm (7
*
) (0.11
to 0.98 in. [0.27
*
])
Choose the width of the right margin when media is loaded in the printer.
See the following for more information.
U
Side(Left)
3 to 25 mm (7
*
) (0.11
to 0.98 in. [0.27
*
])
Choose the width of the left margin when media is loaded in the printer.
See the following for more information.
U
Margin Between Pa‐
ges
0 to 999 mm (10
*
) (0
to 39.33 in. [0.39
*
])
Sets the margin between printed pages.
Width Adjustment
-10 to +10 mm (0
*
)
(-0.39 to 0.39 in. [0
*
])
You can adjust a margin between pages. Even after making adjustments,
the size of the margin may change, depending on the media and usage
environment.
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
U
Print Start Position
0 to 1000 mm (0
*
)
(0 to 39.37 in. [0
*
])
Adjust this parameter if you want to print from the near center of the
media or if you want to shift the printed area left from the
Side(Right)
setting. The value set for the area between the right edge of the media and
Print Start Position
is left blank. If a value is selected for
Side(Right)
, an
additional area corresponding to the width selected for
Side(Right)
is left
blank. See the following for more information.
U
Skip Wrinkled Media
On
*
Normally, leave this
On
.
When this is
On
, if jobs do not print continuously, 300 mm (11.81 in.) of
media is fed to skip wrinkled parts, and then printing is done.
Off
Job Connection
On
When this is turned
On
, the next job starts printing without feeding media,
drying, or rewinding between continuous print jobs. There are no
operations between jobs so printing time is that much shorter.
Off
*
SC-F10000H Series/SC-F10000 Series User's Guide
Control Panel Menu
155
