B
Move to the back side and check the condition of
the media.
If the media is affixed to the roll core, then cut it
apart using scissors as seen in the illustration, and
move on to the next procedure.
If it is not affixed, then move on to the next
procedure straight away.
C
Follow the Steps 6 to 14 on "Removing the
Loaded Media" to remove the roll core.
U
“Removing the Loaded Media” on page 89
D
Move to the front side, and turn Off the Auto
switch of the Auto Take-up Reel Unit.
E
Take up the media completely by operating the
Manual switch as necessary.
F
Follow the procedure on "Removing Media" to
remove the roll.
U
G
Lower the media loading lever.
Follow the on-screen instructions to load a new media,
and attach it to the Auto Take-up Reel Unit to resume
printing.
U
U
“Using the Auto Take-up Reel Unit” on page 77
Before Printing
To maintain print quality, perform the following
inspection before starting work each day.
Check the amount of ink remaining:
Check the amount of ink remaining, and replace the old
ink cartridge if ink is expended. If ink is expended
during printing, the printer automatically switches to
the other ink cartridge and continues printing.
You can replace the expended ink cartridge while
printing continues.
You can check the ink level on the Home screen.
U
“Understanding and Operating the Display” on
Replacing Ink Cartridges
U
Print head nozzle check:
Perform a print head nozzle check to check for clogged
nozzles.
Perform print head cleaning if parts of the printed
pattern are faint or missing.
Print head nozzle check
U
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
92
