EPSON EPL-N3000/AcuLaser M4000N
Revision C
Adjustment
Adjustment
398
Confidential
5.2 Adjustment
5.2.1 Reset Life Counter
PURPOSE
This menu is provided for resetting life counters of parts or components stored in the
printer. Whenever any of those parts or components is replaced, use this menu to reset
the corresponding life counter to 0 (zero).
PROCEDURE
Reset Menu
1.
Reassemble the printer.
2.
Turn the printer on.
3.
When the printer started up, click the [
] button.
4.
Select "Reset Menu" using the [
] or [
] button, then click the [OK] button.
5.
Select "Reset XXXXX Counter" using the [
] or [
] button, then click the [OK]
button. The life counter of "XXXXX" will be reset to "0".
Maintenance Menu
1.
Reassemble the printer.
2.
While holding down the [
], [
], [
], and [
] simultaneously, turn the printer on.
3.
When "MAINTENANCE MODE" is displayed on the LCD, release the buttons.
4.
Select "Maintenance Menu" using the [
] or [
] button, then click the [OK] button.
5.
Select "Reset XXXXX Counter" using the [
] or [
] button, then click the [OK]
button. The life counter of "XXXXX" will be reset to "0".
Parts
Menu
Fuser Unit
Reset Fuser Counter
Maintenance Unit
Reset Maintenance Counter
Parts
Menu
KIT ROLL ASSY FEED (Cassette 2)
Reset LC2 Counter
KIT ROLL ASSY FEED (Cassette 3)
Reset LC3 Counter
Summary of Contents for AcuLaser M4000N
