Epson AcuLaser M4000N, Service Manual

Page: 274 / 477

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly 500 Paper Exit 274
Confidential
4.8.13 ROLL PINCH FU, SPRING PINCH FU
Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the five screws (gold, tapping, 6mm) securing the CHUTE LOW FU to
the COVER REAR 500.
3. Release the hook of the COVER REAR 500, and remove the CHUTE LOW FU
from the COVER REAR 500.
4. Remove the two screws (gold, tapping, 6mm) securing the CHUTE LOW FU.
5. Insert a screwdriver or alike between the ROLL PINCH FU and the CHUTE UP
FU, and remove the ROLL PINCH FU.
6. Remove the SPRING PINCH FU.
Installation
1. Install the SPRING PINCH FU.
2. Install the ROLL PINCH FU.
3. Secure the CHUTE UP FU with the two screws (gold, tapping, 6mm).
4. Install the CHUTE LOW FU to the COVER REAR 500, and secure it at the hook.
5. Secure the CHUTE LOW FU to the COVER REAR 500 with the five screws
(gold, tapping, 6mm).
6. Install the COVER REAR 500. (p.270)
Figure 4- 85. ROLL PINCH FU, SPRING PINCH FU Removal
ROLL PINCH FU
SPRING PINCH FU
JG3305AA