epiphan Pearl-2 Rackmount User Manual Download Page 449

Page: 449 / 497

Pearl-2 User Guide

Controlling Pearl-2 using RS-232 / serial port

Command Name

Description

system.

Configuration Commands

(see

Configuration keys for third party APIs

for available keys)

GET.<channel>.<key>

GET.<recorder>.<key>

Gets the saved value of a given parameter for the specified channel or recorder.

SET.<channel>.<key>

SET.<recorder>.<key>

Sets the value of a given parameter for the specified channel or recorder. The
value is not saved until the SAVECFG command is sent.

SAVECFG

Saves the parameters modified by the SET command.

Status Commands

STATUS.<channel>

STATUS.<recorder>

Reports the recording status of the specified channel or recorder.

Status is one of:

RUNNING

STOPPED

UNINITIALIZED

STATUS

Reports the recording status of each channel and recorder.

Status is one of:

RUNNING

STOPPED

UNINITIALIZED

FREESPACE

Reports the free storage space, in bytes.

RECTIME.<channel>

RECTIME.<recorder>

Reports the elapsed recording time in seconds for the current file on the specified
channel or recorder.

RECTIME

Reports the elapsed recording time in seconds for the current file on each channel.

Pearl-2 returns a status change message whenever changes are made.

Table 73

RS-232 Status Changed Messages

Command Name

Description

STATUS.<channel> <status>

Provides the status of the recording service for the channel as either:

Running

436

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands

epiphan Pearl-2 Rackmount, User Manual

Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands