epiphan Pearl-2 Rackmount User Manual Download Page 370

Page: 370 / 497

Pearl-2 User Guide

Restart recording

4. Change the default recording file settings.

Time limit

: Select a value from 5 minutes to unlimited.

Size limit

: Select a value from 50 MB to 64 GB.

File type

: AVI, MPEG-TS, MOV, MP4, or MP4-Fragmented.

5. (Optional) Enter a prefix for the recordings. All new recorded files for this channel or recorder will be

prefixed using the text you enter.

6. (Optional) Click the check box to exclude this channel or recorder from automatic file uploads, see

FTP

and automatic file transfers

7. Click

Apply

Restart recording

Recordings are automatically saved to a file and a new recording is started when:

357

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Brands by name

Popular brands

epiphan Pearl-2 Rackmount, User Manual

Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Brands by name

Popular brands