epiphan Pearl-2 Rackmount User Manual Download

Page: 343 / 497

Pearl-2 User Guide

MPEG-TS streams using UDP push

in cases where folders are not displayed, use dot separator hierarchy to help your viewers filter
out unwanted streams by category.

7. Click

Apply

8. Click the

Info

menu option of the Admin panel. An Info page opens displaying stream information.

To view the stream from a media player, open the URL in a media player, for example:

rtp://@ip:port or in the case of the sample configuration in the figure shown above:

rtp://@226.10.24.32:7000

To view the stream when SAP announce has been set and the stream is advertised on a media player, set-top-
box or Smart TV, refer to

Viewing with Session Announcement Protocol (SAP)

MPEG-TS streams using UDP push

Before configuring your channel for MPEG-TS streaming, ensure the following codecs are configured in the
encoding section:

Video – H.264

Audio – MP3 or AAC, if audio is configured.

To configure MPEG-TS with UDP push:

1. Login to the Admin panel as

admin

, see

Connect to the Admin panel

3. From the Channels menu, select a channel and click

Streaming

. The Streaming configuration page

opens.

4. Click

New stream

and select

MPEG-TS UDP push

330

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands

epiphan Pearl-2 Rackmount, User Manual

Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands