epiphan Pearl-2 Rackmount User Manual Download

Page: 345 / 497

Pearl-2 User Guide

Multicast streaming using RTP/UDP

in cases where folders are not displayed, use dot separator hierarchy to help your viewers filter
out unwanted streams by category.

8. Click

Apply

To view the stream, open the URL in a media player, for example:

udp://@ip:port

For example:

udp://@226.10.24.32:7000

To view the stream when SAP announce has been set and the stream is advertised from a media player, set-
top-box or Smart TV, refer to

Viewing with Session Announcement Protocol (SAP)

Multicast streaming using RTP/UDP

1. Login to the Admin panel as

admin

, see

Connect to the Admin panel

3. From the Channels menu, select a channel and click

Streaming

. The Streaming configuration page

opens.

4. Click

New stream

and select

RTP/UDP push

5. Enter the following:

Destination multicast IP address.

Audio port number through which the audio will stream.

Video port number through which the video will stream.

332

Summary of Contents for Pearl-2 Rackmount


















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands

epiphan Pearl-2 Rackmount, User Manual

Search results

Summary of Contents for Pearl-2 Rackmount

Reviews:

Related manuals for Pearl-2 Rackmount

Brands by name

Popular brands