Environnement MP101M, Technical Manual

Page: 36 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
1–18
a.3) Installing the regulated sampling tube (RST)
Place the sampling head in its housing and adjust the height to ensure tightness between the head
channel and the channel of the MP101M, without crushing it (see diagram below).
Sampling head
Sampling head channel
MPM101M "flexible"
channel
Gasket, compressed
Gasket of tightness
(head/MP101M link)
Do not crush MP101M
channel with head. The
channel should remain
flexible to enable
disengaging the
MP101M from its
head
Block sampling head with flanges provided for this purpose (external internal flange).
CAUTION: DO NOT FORGET TO ENSURE TIGHTNESS ON TOP OF BOX USING CLAMP
PROVIDED WITH ASSEMBLY (see diagram below).
Figure 1–9 – Installing the regulated sampling tube (RST)