Environnement MP101M, Technical Manual

Page: 30 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
1–12
1.1.3. ASSOCIATED EQUIPMENT
–
Sampling assembly,
– Pump assembly,
–
Recorders, PC (optional)
1.1.3.1. Sampling assembly
See section 1.2.5.
It consists of :
– A standard sampling head, interchangeable according to application :

TSP,

PM10 US EPA* or EN12341

PM2,5 US EPA** or EN14907

PM1
(*) : as specified in the 40CFR 50, appendix L paragraph 7.3.2
«
The sample inlet shall be fabricated
as indicated in Figures L-2 through L-18 of this appendix and shall meet all associated requirements
».
(**) : as specified in the 40 CFR 50, appendix L paragraph 7.3.2 and 7.3.4.4. « The cyclone-type
separator is identified as a BGI VSCCTM Very Sharp Cut Cyclone particle size separator specified as
part of EPA-designated equivalent method EQPM-0202-142 (67 FR 15567, April 2, 2002 ».
– A regulated sampling tube (RST)***, stainless steel sampling conduit comprising:

A heating ribbon,

A 60 mm diameter stainless steel tube protecting the sampling conduit,

Two flanges and a seal for tightness with respect to the outside.

A meterological sensor composed of a temperature probe and a humidity probe.

A regulated sampling tube (RST) channel available in several lengths : 1 m, 1.50 m, 2 m,
2.75 m or more subject to special study.
(***) : standard for USEPA equivalencies