Environnement MP101M, Technical Manual

Page: 28 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
1–10
1.1.2.3. Components location
Refer to Figure 1–7.
The components inside the unit are accessed by simply unscrewing the knurled knobs (Rep. 9, Figure
1–5) at the rear of the unit and removing the upper cover.
The housing is divided into three parts, separated by two aluminium plates:

the flow regulation part (1),

the collector and Beta gauge assembly at the front of the unit (2),

the electronics part (3) composed of

the module board (4),

the power supply board (6).
NOTE : – the Arm7 board (5) is located behind the display and linked to the module board
with a suitable cable.
(1) Flow regulation part, (2) collector and Beta gauge assembly, (3) electronics part, (4) Module board,
(5) ARM7 board, (6) power supply board.
Figure 1–7 – Components location