Environnement MP101M, Technical Manual, Page: 99 / 196

Duplication prohibited
MP101M
Environnement
S.A
3–43
SEPTEMBER 2013
Editing stored data in tabular form:
This screen shows the list of stored data according to parameters defined in the previous screen. The
running mode (measurement, zero, calibration, etc.) during a data storage period is coded in the
status column. The meanings of the status codes are follows:
00 Measurement valid
01 Range 2 exceedence shooting
02 General alarm
20 Maintenance
40 Less than 2/3 of valid measurements during the average period
80 Power supply failure
FF Configuration modification
The displayed status code corresponds to the sum of the status codes (hexadecimal numbers) that
occurs during the memorization period.
Definition of keys specific to this screen:
[

] [

] Select the previous or the next page.
[

]
Select stored data beginning or end.
[
>> ]
Display other measurement channels if more than 3 channels are programmed
in the «
CONFIGURATION

Measure channels» screen