Environnement MP101M, Technical Manual, Page: 76 / 196

Environnement
S.A
MP101M
Duplication prohibited
SEPTEMBER 2013
3–20
3.3.3.1 CALIBRATION

Beta gauge
The screen shown below displays:

the Beta calibration coefficient (K) determined during the previous calibration,

the value of the reference gauge used for the calibration,

the number of consecutive calibrations necessary to obtain a calibration value,

the date of the previous calibration.
In this screen, it is possible to manually modify the K calibration coefficient (for example, after a
calibration or a manual check): using the [

] and [

] keys, select the value of the K coefficient, then
press down the [

] key and modify the coefficient value with the [

] [

] [

] [

] keys. Then validate
with [

]
By pressing down the [»] key, the user has access to the display which allows calibration of the Beta
gauge.
It is necessary to press down the [Auto] key in the screen shown above to access the calibration.