Service Mode / Parameter Level
- 34 -
Example: Positioning with 2 speeds
In principle, the following applies when setting the speeds:
Creep speed
= 10.0
Correction
= 1.0
Figure 25: Creep speed (2 speeds)
Example: Positioning with 3 speeds
In principle, the following applies when setting the speeds:
Slow speed
= 20.0
Creep speed
= 10.0
Correction stop = 1.0
Figure 26: Creep and Slow speed (3 speeds)
Creep speed > Correction stop
Configuration and Functions
Slow speed
Creep speed > Correction stop
Target: 100.0 mm
Correction stop
Slow
Middle
Fast speed
99.0 mm
Creep speed
90.0 mm
Slow speed
80.0 mm
Fast speed
Creep speed
Target: 100.0 mm
Correction stop
Slow
90.0 mm
99.0 mm
Summary of Contents for P40T-002 Series
Page 49: ...Service Mode Parameter Level 49 11 11Sub Menu Times System Figure 33 System Times ...
Page 83: ... 83 Notes ...
Page 84: ... 84 Notes ...
Page 85: ... 85 Notes ...
