Elgo P40T-002 Series, Operating Manual

Page: 48 / 88

Service Mode / Parameter Level
- 48 -
11.10.3 Pressure Adjust Angle
This parameter defines the pressure in percent to adjust the angle.
11.10.4 Pressure Adjust Gap
This parameter defines the pressure in percent to adjust the gap.
11.10.5 Gap / Angle / Pressure

locked

unlocked

hidden
11.10.6 Gap 2 (right)

ON

OFF
11.10.7 Next set stepping
For program operation, various settings can be made for processing the following data set (program block):

without

no next set stepping activated

without start

when a set has been processed, the next set is loaded

with start

when a set has been processed, START must be pressed to load the next set