Elgo P40T-002 Series, Operating Manual

Page: 18 / 88

Operation Modes
- 18 -
Figure 10: Select material from list
10.1.1 Piece Counter
The piece counter can be configured in 3 modes:

Downwards counter

Upwards counter

Counter disabled
The active mode in each case is displayed in the “Single Mode” operating mask for the piece counter
(

10.1.1.1,

10.1.1.2,

10.1.1.3)
The mode is set resp. selected in the piece pre-selection window.
Figure 11: Piece counter selection mask
When you exit the single mode or switch off the controller, the current quantity is stored in the single-block.
Scroll
Exit list
Consecutive
material number
Short Name
Plain text field for
material description
Scroll