Elgo P40T-002 Series, Operating Manual

Page: 31 / 88

Service Mode / Parameter Level
- 31 -

Drive signals

Mode 7
3 speed
Forward/backward separately
Output signals 1 2 3 4
Creep speed forward X
Slow speed forward X X
Fast speed forward X X X
Creep speed backward X
Slow speed backward X X
Fast speed backward X X X

Drive signals

Mode 8
2 speeds
Forward/backward separately
Output signals 1 2 3 4
Creep speed forward X
Fast speed forward X X
Creep speed backward X
Fast speed backward X X
11.4.6 Spindle Compensation Mode

Without = No spindle compensation

With spindle − = negative spindle compensation

With s = positive spindle compensation

Forced loop − = with backlash by positioning in negative direction

Forced loop + = with backlash by positioning in positive direction
11.4.7 Hardware Endposition

Both enabled

Negative disabled

Positive enabled

Both disabled
11.4.8 Retract Function

Mode 1 = Retract to actual value + adjusted value with return (see 11.5.7)

Mode 2 = Retract to adjusted value with return (see 11.5.7)

Mode 3 = Retract positive to actual value for the adjusted time period with return (see

11.6.9)

Mode 4 = Retract to actual value + adjusted value without return (see 11.5.7)

Mode 5 = Retract to adjusted value* without return (see 11.5.7)

Mode 6 = Retract positive to actual value for the adjusted time period without return (see

11.6.9)

Mode 7 = Retract to actual value – adjusted value with return (see 11.5.7)

Mode 8 = Retract negative to actual value for the adjusted time period with return (see

11.6.9)
11.4.9 mm/ Inch Mode
Measurement unit: mm or inches