Elgo P40T-002 Series, Operating Manual

Page: 10 / 88

Product Features
- 10 -
5 Product Features
P40T-002 is a compact, programmable multi-axis positioning controller with touchscreen panel, designed for
axis positioning and cutting automation on guillotine shears.
Overview of features:
 16 free programmable digital in-/outputs.
 Analog or digital outputs for 1 - 3 speed operation.
 Program memory (1000 blocks).
 Angle control / gap control / backgauge.
 Cut length and cut offset calculation by angle measurement system or time.
 Material list for angle, gap and pressure.
 Automatic cutting machine
 Sheet support
 Sheet return (RTO)

Serial interface for data exchange with a PC
Figure 1: P40T - Touch Panel
Basic Operation Modes:
The P40T-002 controller consists of three general operation modes:
Manual: The manual Inching operation allows axis movements via touchscreen.
Single: A single data block can be worked off.
Program: Several data sets can be lined up or programmed individually in program mode.
This series of program blocks is then processed sequentially.