Draytek Vigor2762 series, User Manual

Page: 643 / 651

Parameter Description
wl wpa Type 1/2/3 to represent different WPA modes.
1 – means WPA+WPA2
2 – means WPA2 Only
3 – means WPA Only
Example
Example
> wl wpa 1
>
Telnet Command: Telnet Command: wl wmm wl wmm
This command allows users to set WMM for wireless connection. It defines the priority levels
for four access categories derived from 802.1d (prioritization tabs).
wl wmm ap QueIdx Aifsn Cwmin Cwmax Txop ACM
wl wmm bss QueIdx Aifsn Cwmin Cwmax Txop ACM
wl wmm ack Que0_Ack Que1_Ack Que2_Ack Que3_Ack
wl wmm enable SSID0 SSID1 SSID2 SSID3
wl wmm apsd value
wl wmm show
Syntax Description
Syntax Description
Parameter Description
ap It means to set WMM for access point.
bss It means to set WMM for wireless clients.
ack It means to map to the Ack policy settings of AP WMM.
enable It means to enable the WMM for each SSID.
0: disable
1: enable
Apsd [value] It means to enable / disable the ASPD(automatic power-save
delivery) function.
0: disable
1: enable
show It displays current status of WMM.
QueIdx It means the number of the queue which the WMM settings will be
applied to. There are four queues, best effort, background, voice,
and video.
Aifsn It controls how long the client waits for each data transmission.
Cwmin/ Cwmax CWMin means contention Window-Min and CWMax means
contention Window-Max. Specify the value ranging from 1 to 15.
Txop It means transmission opportunity. Specify the value ranging from
0 to 65535.
ACM It can restrict stations from using specific category class if it is
enabled.
0: disable
1: enable
Example
Example
Vigor2762 Series User’s Guide 633