Draytek Vigor2762 series, User Manual

Page: 598 / 651

month - 1 ~ 12
th weekday – 1 ~ 5, 9: last week
day in week - 0:Sun, 1:Mon, 2:Tue, 3:Wed, 4:Thu, 5: Fri, 6:Sat
hour – 0 ~ 23
e.g, sys daylightsave -y 9 1 0 14
-z <month> <th weekday>
<day in week> <hour> Set the detailed settings of the ending day for yearly type.
month - 1 ~ 12
th weekday – 1 ~ 5, 9: last week
day in week - 0:Sun, 1:Mon, 2:Tue, 3:Wed, 4:Thu, 5: Fri, 6:Sat
hour – 0 ~ 23
e.g, sys daylightsave -z 3 1 6 14
Example
Example
> sys daylightsave -y 9 1 0 14
% Start: Yearly on Sep 1th Sun 14:00
Telnet Command:
Telnet Command:
sys
sys
dnsCacheTbl
dnsCacheTbl
This command is used to configure TTL settings which will be displayed in DNS Cache table.
Syntax
Syntax
sys dnsCacheTbl [<command><parameter>|…]
Syntax Description Syntax Description
Parameter Description
[<command><parameter>|
…] The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-l Display DNS IPv4 entry in the DNS cache table.
-s Display DNS IPv6 entry in the DNS cache table.
-v Display the TTL limit value in the DNS cache table.
-t < 0/n > Set the TTL limit value in the DNS cache table.
0- No limit
N – Greater than or equal to 5.
-c Clear the DNS cache table.
Example
Example
> sys dnsCacheTbl -l
%DNS Cache Table List
> sys dnsCacheTbl -t 65
% Set TTL limit: 65 seconds.
% When TTL larger than 65s , delete the DNS entry in the router's DNS
cache tabl
e.
>
Telnet Command: Telnet Command: sys sys syslog syslog
This command is used to configure
Syntax
Syntax
Vigor2762 Series User’s Guide 588