Draytek Vigor2762 series, User Manual

Page: 639 / 651

add [MAC] [ssid1 ssid2 ssid3
ssid4] [isolate]
It means to associate a MAC address to certain SSID interfaces'
access control settings. The isolate setting will limit the wireless
client's network capabilities to accessing the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
del [MAC] It means to delete a MAC address entry defined in the access
control list.
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
It means to set white/black list for each SSID.
wl acl show It means to show access control status.
wl acl showmode It means to show the mode for each SSID.
wl acl clean It means to clean all access control setting.
Example
Example
> > wl acl showmode
ssid1: none
ssid2: none
ssid3: none
ssid4: none
> wl acl add 00-50-70-ff-12-70
Set Done !!
> wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate
Set Done !!
> wl acl show
----------Enable Mac Address Filter---------
ssid1: dis ssid2: dis ssid3: dis ssid4: dis
----------MAC Address Filter----------
Index Attribute MAC Address Associated SSIDs
0 00:50:70:ff:12:70 ssid1 ssid2 ssid3
ssid4
1 s 00:50:70:ff:12:70 ssid1 ssid2
s: Isolate the station from LAN
>
Telnet Command:
Telnet Command:
wl config
wl config
This command allows users to configure general settings and security settings for wireless
connection.
wl config mode [value]
wl config mode show
wl config channel [number]
wl config preamble [enable]
wl config txburst [enable]
wl config ssid [ssid_num enable ssid_name [hidden_ssid]]
wl config security [SSID_NUMBER] [mode]
wl config ratectl [ssid_num enable upload download ]
wl config isolate [ssid_num lan member]
Vigor2762 Series User’s Guide 629