Draytek Vigor2762 series, User Manual

Page: 638 / 651

-l <lan> It means to specify the LAN interface for applying the function.
lan1 and lan2: -l 1,2
-s <ssid> It means to specify the WLAN interface (SSID1 ~ SSID4) for applying
the function.
-m <message> Redirect to message.
-u <url> Redirect to url.
-f <url> Redirect to url and force the user to click on the button to
proceed.
-e Enable the profile.
-d Disable the profile.
-i Display the content of the profile.
-c Reset all of the settings.
-x <0/1/2> Change the priority of the profile.
0:none
1:wptl
2:usermgt
-h<0/1> Disable(0)/enable(1) redirection of HTTPS.
Example
Example
> wptl -e -p 1 -l 1,2 -s 1 -u http://www.draytek.com
Profile 1 enable ... [OK]
Applied LAN interfaces ... [OK]
Applied WLAN interfaces ... [OK]
Redirect to URL mode ... [OK]
>
Telnet Command:
Telnet Command:
wl acl
wl acl
This command allows the user to configure wireless access control settings.
Syntax
Syntax
wl acl enable [ssid1 ssid2 ssid3 ssid4]
wl acl disable [ssid1 ssid2 ssid3 ssid4]
wl acl add [MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del [MAC]
wl acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
Syntax Description
Syntax Description
Parameter Description
enable [ssid1 ssid2 ssid3
ssid4] It means to enable the settings for SSID1, SSID2, SSID3 and SSID4.
disable [ssid1 ssid2 ssid3
ssid4] It means to disable the settings for SSID1, SSID2, SSID3 and SSID4.
Vigor2762 Series User’s Guide 628