Draytek Vigor2762 series, User Manual

Page: 467 / 651

3 4 0
4 5 0
5 6 0
6 7 0
7 8 0
8 9 0
9 10 0
Telnet Command:
Telnet Command:
adsl pvcbinding
adsl pvcbinding
This command can configure PVC to PVC binding. Such command is available only for PPPoE
and MPoA 1483 Bridge mode.
adsl pvcbinding [pvc_x pvc_y | status | -1 ]
Syntax Description
Syntax Description
Parameter Description
pvc_x The PVC number for the source.
pvc_y The PVC number that the source PVC will be bound to.
status Display a table for PVC binding group.
-1 It means to clear specific PVC binding.
Example
Example
> adsl pvcbinding 3 5
set done. bind pvc3 to pvc5.
The above example means PVC3 has been bound to PVC5.
> adsl pvcbinding 3 -1
clear pvc-1 binding
The above example means the PVC3 binding group has been removed.
Telnet Command: adsl inventory
Telnet Command: adsl inventory
This command is used to display information about CO or CPE.
Syntax
Syntax
adsl inventory [co|cpe]
Syntax Description Syntax Description
Parameter Description
co It means DSLAM (Digital Subscriber Line Access Multiplexer) or CO
(Central Office).
cpe It means CPE (Customer Premise Equipment).
Example
Example
>
adsl inventory co
xDSL inventory info only available in showtime.
> adsl inventory cpe
G.994 vendor ID : 0XB5004946544E5444
G.994.1 country code : 0XB500
Vigor2762 Series User’s Guide 457