Draytek Vigor2762 series, User Manual

Page: 547 / 651

Address type:[single]
Start ip address:[192.168.1.45]
End/Mask ip address:[0.0.0.0]
Invert Selection:[0]
Telnet Command:
Telnet Command:
object ip
object ip
v6
v6
grp
grp
This command is used to integrate several IP objects under an IP group profile.
object ip grp setdefault
object ip grp INDEX -v
object ip grp INDEX -n NAME
object ip grp INDEX -i INTERFACE
object ip grp INDEX -a IP_OBJ_INDEX
Syntax Description
Syntax Description
Parameter Description
setdefault It means to return to default settings for all profiles.
INDEX It means the index number of the specified group profile.
-v It means to view the information of the specified group profile.
Example:
object ip grp 1 -v
-n NAME It means to define a name for the IP group.
NAME: Type a name with less than 15 characters.
Example:
object ip grp 8 -n bruce
-i INTERFACE It means to define an interface for the IP group.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=2, means WAN
Example:
object ip grp 3 -i 0
-a IP_OBJ_INDEX It means to specify IP object profiles for the group profile.
Example:
:object ip grp 3 -a 1 2 3 4 5
The IP object profiles with index number 1,2,3,4 and 5 will be
group under such profile.
Example Example
> object ip grp 2 -n First
IP Group Profile 2
Name :[First]
Interface:[Any]
Included ip object index:
[0:][0]
[1:][0]
[2:][0]
[3:][0]
[4:][0]
[5:][0]
[6:][0]
[7:][0]
Vigor2762 Series User’s Guide 537