Draytek Vigor2762 series, User Manual

Page: 388 / 651

To set a new profile, please do the steps listed below:
1. Click the Mail Server tab, and click the number (e.g., #1) under Index column for
configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name Type a name for such mail service profile. The maximum
length of the name you can set is 31 characters.
SMTP Server Type the IP address of the mail server.
SMTP Port Type the port number for SMTP server.
Sender Address Type the e-mail address of the sender.
Use SSL Check this box to use port 465 for SMTP server for some e-
mail server uses https as the transmission method.
Authentication The mail server must be authenticated with the correct
username and password to have the right of sending
message out. Check the box to enable the function.
Username – Type a name for authentication. The maximum
length of the name you can set is 31 characters.
Password – Type a password for authentication. The
maximum length of the password you can set is 31
characters.
Sending Interval Define the interval for the system to send the SMS out.
3. After finishing all the settings here, please click OK to save the configuration.
VII-1-11 Notification Object
VII-1-11 Notification Object
This page allows you to set ten profiles which will be applied in Application>>SMS/Mail
Alert Service .
You can set an object with different monitoring situation.
Vigor2762 Series User’s Guide 378