Draytek Vigor2762 series, User Manual

Page: 651 / 651

Use “appqos traceable –v” to display all of the traceable APS with
speficed index number.
Use “appqos untraceable –v” to display all of the untraceable APS
with speficed index number.
-e It menas to enable QoS for application(s) and assign QoS class.
AP_INDEX Each index number represents one application.
Index number: 50, 51, 52, 53, 54, 58, 60, 62, 63, 64, 65, 66, 68 are
used for 13 traceabel APPs.
Index number: 0~49, 55~59, 61, 67, 69, and 70~123 are used for
125 untraceable AP.
CLASS Specifies the QoS class of the application, from 1 to 4
1:Class 1, 2:Class 2, 3:Class 3, 4:Other Class
-d It means to disable QoS for application(s).
Example
Example
> appqos enable 1
APP QoS set to Enable.
> appqos traceable -e 68 2
TELNET: ENABLED, QoS Class 2.
Telnet Command: nand bad /nand usage
Telnet Command: nand bad /nand usage
“NAND usage” is used to display NAND Flash usage; “nand bad” is used to display NAND Flash
bad blocks.
nand bad
nand usage
Example
Example
>nand usage
Show NAND Flash Usage:
Partition Total Used Available Use%
cfg 4194304 7920 4186384 0%
bin_web 33554432 11869493 21684939 35%
cfg-bak 4194304 7920 4186384 0%
bin_web-bak 33554432 11869493 21684939 35%
> nand bad
Show NAND Flash Bad Blocks:
Block Address Partition
1020 0x07f80000 unused
1021 0x07fa0000 unused
1022 0x07fc0000 unused
1023 0x07fe0000 unused
Vigor2762 Series User’s Guide 641