Draytek Vigor2762 series User Manual Download Page 278

Page: 278 / 651

service powered by Commtouch. If you want to use such service (trial or
formal edition), you have to perform the procedure of activation first. For

the service of formal edition, please contact with your dealer/distributor
for detailed information.

Info 2

Commtouch is merged by Cyren, and GlobalView services will be continued
to deliver powerful cloud-based information security solutions! Refer to:

http://www.prnewswire.com/news-releases/commtouch-is-now-cyren-

239025151.html

Available settings are explained as follows:

Item

Description

Activate

Click it to access into MyVigor for activating WCF service.

Setup Query Server

It is recommended for you to use the default setting, auto-

selected. You need to specify a server for categorize
searching when you type URL in browser based on the web

content filter profile.

Setup Test Server

It is recommended for you to use the default setting, auto-

selected.

Find more

Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.

Set to Factory Default

Click this link to retrieve the factory settings.

Default Message

You can type the message manually for your necessity or
click this button to get the default message which will be
displayed on the field of

Administration Message

Vigor2762 Series User’s Guide

268

Summary of Contents for Vigor2762 series












































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor2762 series

Reviews:

Related manuals for Vigor2762 series

Brands by name

Popular brands

Draytek Vigor2762 series, User Manual

Search results

Summary of Contents for Vigor2762 series

Reviews:

Related manuals for Vigor2762 series

Brands by name

Popular brands