Draytek Vigor2762 series, User Manual

Page: 634 / 651

enable/disable It means to enable/disable the Multi-VLAN function.
on/off It means to turn on/off bridge mode for the specific channel.
clear It means to turn off/clear the port.
tag tag_no It means to tag a number for the VLAN.
-1: No need to add tag number.
1-4095: Available setting numbers used as tagged number.
service type It means to specify the service type for VLAN.
0: Normal.
1: IGMP.
vlan priority It means to specify the priority for the VALN setting.
Range is from 0 to 7.
px It means LAN port. Available setting number is from 2 to 4. Port
number 1 is locked for NAT usage.
Keep Tag It means Multi-VLAN packets will keep their VLAN headers to LAN.
Example
Example
PVC 7 will map to LAN port 2/3/4 in bridge mode; service type is Normal. No tag added.
> wan mvlan 7 on p2 p3 p4
PVC Bridge p1 p2 p3 p4 p5 p6 Service Type Tag Priority Keep
Tag
------------------------------------------------------------------
7 ON 0 0 1 1 0 0 Normal 0(OFF) 0 OFF
>
Telnet Command:
Telnet Command:
wan
wan
multifno
multifno
This command allows you to specify a channel (in Multi-PVC/VLAN) to make bridge
connection to a specified WAN interface.
wan multifno [channel #] [WAN interface #]
wan multifno status
Syntax Description
Syntax Description
Parameter Description
channel # There are 4 (?) channels including VLAN and PVC.
Available settings are:
1=Channel 1
3=Channel 3
4=Channel 4
5=Channel 5
WAN interface # Type a number to indicate the WAN interface.
1=WAN1
status It means to display current bridge status.
Example Example
> wan multifno 5 1
% Configured channel 5 uplink to WAN1
Vigor2762 Series User’s Guide 624