Draytek Vigor2762 series, User Manual

Page: 140 / 651

Note that the router has its own built-in services (servers) such as Telnet, HTTP and FTP
etc. Since the common port numbers of these services (servers) are all the same, you may
need to reset the router in order to avoid confliction.
For example, the built-in web user interface in the router is with default port 80, which
may conflict with the web server in the local network, http://192.168.1.13:80. Therefore,
you need to
change the router’s http port to any one other than the default port 80 to
avoid conflict, such as 8080. This can be set in the System Maintenance >>Management
Setup . You then will access the admin screen of by suffixing the IP address with 8080, e.g.,
http://192.168.1.1:8080 instead of port 80.
Vigor2762 Series User’s Guide 130