Draytek Vigor2762 series, User Manual

Page: 546 / 651

Telnet Command:
Telnet Command:
object ip
object ip
v6
v6
obj
obj
This comman is used to create an IP object profile.
object ip obj setdefault
object ip obj INDEX -v
object ip obj INDEX -n NAME
object ip obj INDEX -i INTERFACE
object ip obj INDEX -s INVERT
object ip obj I NDEX -a TYPE [START_IP] [END/MASK_IP]
Syntax Description Syntax Description
Parameter Description
setdefault It means to return to default settings for all profiles.
INDEX It means the index number of the specified object profile.
-v It means to view the information of the specified object profile.
Example:
object ip obj 1 -v
-n NAME It means to define a name for the IP object.
NAME: Type a name with less than 15 characters.
Example:
object ip obj 9 -n bruce
-i INTERFACE It means to define an interface for the IP object.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=3, means WAN
Example:
object ip obj 8 -i 0
-s INVERT It means to set invert seletion for the object profile.
INVERT=0, means disableing the function.
INVERT=1, means enabling the function.
Example:
object ip obj 3 -s 1
-a TYPE It means to set the address type and IP for the IP object profile.
TYPE=0, means Mask
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
object ip obj 3 -a 2
[START_IP] When the TYPE is set with 2, you have to type an IP address as a
starting point and another IP address as end point.
Type an IP address.
[END/MASK_IP] Type an IP address (different with START_IP) as the end IP
address.
Example
Example
> object ip obj 1 -n marketing
> object ip obj 1 -a 1 192.168.1.45
> object ip obj 1 -v
IP Object Profile 1
Name :[marketing]
Interface:[Any]
Vigor2762 Series User’s Guide 536