Draytek Vigor2762 series, User Manual

Page: 641 / 651

specified SSID. 0: disable and 1:enable.
upload : It means to configure the rate control for data upload.
The unit is kbps.
download : It means to configure the rate control for data
download. The unit is kbps.
isolate [ssid_num lan
member] It means to isolate the wireless connection for LAN and/or
Member.
lan – It can make the wireless clients (stations) with remote-dial
and LAN to LAN users not accessing for each other.
member – It can make the wireless clients (stations) with the same
SSID not accessing for each other.
Example
Example
> wl config mode 11bgn
Current mode is 11bgn
% <Note> Please restart wireless after you set the channel
> wl config channel 13
Current channel is 13
% <Note> Please restart wireless after you set the channel.
> wl config preamble 1
Long preamble is enabled
% <Note> Please restart wireless after you set the parameters.
> wl config ssid 1 enable dray
SSID Enable Hide_SSID Name
1 1 0 dray
% <Note> Please restart wireless after you set the parameters.
> wl config security 1 wpa1x
%% Configured Wlan Security Setting:
% SSID1
%% Mode: wpa1x
%% Wireless card must be reset for configurations to take effect
%% (Telnet Command: wl restart)
Telnet Command:
Telnet Command:
wl set
wl set
This command allows users to configure basic wireless settings.
wl set [SSID] [CHAN[En]]
wl set txburst [enable]
Syntax Description
Syntax Description
Parameter Description
SSID It means to type the SSID for the router. The maximum character
that you can use is 32.
CHAN[En] It means to specify required channel for the router.
CHAN: The range for the number is between 1 ~ 13.
En : type on to enable the function; type off to disable the
function.
txburst [enable] It means to enhance the performance in data transmission about
40%* more (by enabling
Tx Burst ). It is active only when both sides
of Access Point and Station (in wireless client) invoke this function
at the same time.
0: disable the function.
Vigor2762 Series User’s Guide 631