Draytek Vigor2762 series, User Manual

Page: 534 / 651

mask It means to specify the subnet mask for the IP address.
remove It means to delete the selected item.
flush It means to remove all the settings in the access list.
Example
Example
> mngt accesslist add 1 192.168.1.89 255.255.255.0
%% Set OK.
> mngt accesslist list
%% Access list :
Index IP address Subnet mask
==========================================
1 192.168.1.89 255.255.255.0
Telnet Command:
Telnet Command:
mngt snmp
mngt snmp
This command allows you to configure SNMP for management.
mngt snmp [-<command> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter Description
[<command>
<parameter>|…]
The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-e <1/2> 1: Enable the SNMP function.
2: Disable the SNMP function.
-g<Community name> It means to set the name for getting community by typing a proper
character. (max. 23 characters)
-s <Community name> It means to set community by typing a proper name. (max. 23
characters)
-m <IP address> It means to set one host as the manager to execute SNMP function.
Please type in IPv4 address to specify certain host.
-t <Community name> It means to set trap community by typing a proper name. (max. 23
characters)
-n <IP address> It means to set the IPv4 address of the host that will receive the
trap community.
-T <seconds> It means to set the trap timeout <0~999>.
-V It means to list SNMP setting.
Example Example
> mngt snmp -e 1 -g draytek -s DK -m 192.168.1.1 -t trapcom -n
10.20.3.40 -T 88
SNMP Agent Turn on!!!
Get Community set to draytek
Set Community set to DK
Manager Host IP set to 192.168.1.1
Trap Community set to trapcom
Notification Host IP set to 10.20.3.40
Trap Timeout set to 88 seconds
Vigor2762 Series User’s Guide 524