Draytek Vigor2762 series, User Manual

Page: 554 / 651

Telnet Command:
Telnet Command:
port
port
This command allows users to set the speed for specific port of the router.
Syntax
Syntax
port [1, 2, 3, 4, wan2, all] [AN, 1000F, 100F, 100H, 10F, 10H, status]
port [enable, disable][1, 2, 3, 4, all]
port status
port sniff [on,off,port,txrx,restart,status]
port 802.1x [enable,disable,status,addport,delport]
port jumbo
port wanfc
Syntax Description
Syntax Description
Parameter Description
1, 2, 3, 4, 5, 6, wan2, all It means the number of LAN port and WAN port.
AN… 10H It means the physical type for the specific port.
AN: auto-negotiate.
100F: 100M Full Duplex.
100H: 100M Half Duplex.
10F: 10M Full Duplex.
10H: 10M Half Duplex.
status It means to view the Ethernet port status.
sniff
[on,off,port,txrx,restart,st
atus]
Set the LAN Port Mirror function.
On: Enable the function.
Off: Disable the function.
Port: Set the mirror port.
E.g., port sniff p1
TXRX: Set the port number to be mirrored for
transmitting/receiving the packets.
E.g., port sniff txrx p2 p3
Restart: After finished the setting, use such command to activate
port mirror function.
Status: Display the status of LAN port mirror.
802.1x[enable,disable,statu
s,addport,delport]
Each LAN port with Wired 802.1x configured will only forward
802.1x packets and block all other packets until the
authentication has successfully completed.
enable: Enable the function.
disable: Disable the function.
Status: Display the status of 802.1x configuration.
Addport: Set the interface (LAN port 1 ~ 4) for applying 802.1x.
E.g., 802.1x addport 1
Delport: Delete the interface (LAN port 1~4) with 802.1x applied.
E.g., 802.1x delport 1
wanfc It means to set WAN flow control.
Example Example
> port 1 100F
Vigor2762 Series User’s Guide 544