Draytek Vigor2762 series, User Manual

Page: 533 / 651

* Service:
- FTP:Yes
- HTTP:No
- HTTPS:No
- TELNET:Yes
- SSH:No
* Subnet:
- LAN 2: disabled
- LAN 3: enabled
- LAN 4: disabled
- LAN 5: disabled
- LAN 6: disabled
- DMZ: disabled
- IP Routed Subnet: disabled
Note: the settings do NOT apply to LAN1, LAN1 is always allowed to
access the router
Telnet Command:
Telnet Command:
mngt echoicmp
mngt echoicmp
This command allows users to reject or accept PING packets from the Internet.
mngt echoicmp [enable]
mngt echoicmp [disable]
Syntax Description
Syntax Description
Parameter Description
enable It means to accept the echo ICMP packet.
disable It means to drop the echo ICMP packet.
Example
Example
> mngt echoicmp enable
%% Echo ICMP packet enabled.
Telnet Command:
Telnet Command:
mngt accesslist
mngt accesslist
This command allows you to specify that the system administrator can login from a specific
host or network. A maximum of three IPs/subnet masks is allowed.
mngt accesslist list
mngt accesslist add [index][ip addr][mask]
mngt accesslist remove [index]
mngt accesslist flush
Syntax Description
Syntax Description
Parameter Description
list It can display current setting for your reference.
add It means adding a new entry.
index It means to specify the number of the entry.
ip addr It means to specify an IP address.
Vigor2762 Series User’s Guide 523